Solar LED Street lights are being used throughout the world and as the latest solar technology gets released, more people are switching to solar powered options. One of the important things which one needs to consider when they purchase a solar LED street light is how many hours would it take to install a solar LED street light.
Lucky for you, installing a solar LED street light doesn’t take a lot of time and can be done within a day. If you want to find out the exact hours that would be required to install a solar LED street light, then you need to read the entire guide to understand how long it would take and all the steps involved in the installation process.
Planning for all the steps beforehand will make it easier for you to get the job done. Installation of the light isn’t rocket science and just about anyone willing to put in a little effort can do it.
Step No. 1: The Installation Hole Needs to be Dug
After you have where you would like to place the solar LED street light, you will need to make sure that a hole has been dug for the solar LED street light to be place into. The hole has to be properly dug so as to ensure that the light is placed in the hole. There are 2 options for having the hole dug.
- The first option is to manually dig the hole using a shovel. Normally, if there’s only one person doing the digging, then it could take up to an hour to get the job done.
- The other option is for you to go with the excavator. This option only takes about 2 to 3 minutes.
Step No. 2: Create the Concrete Foundation Kits
The next step requires you to cement a proper foundation so as for it to hold the solar LED street pole properly. It should about 20 minutes for this if only a person is doing it.
Step No. 3: Create the Wire Connections
You need to be extra careful doing this task as it requires concentration. Make sure that all the wires have been properly connected between the battery and the lights. It should take you another 20 minutes if you do it on your own.
Step No. 4: Have the Pole Fixed to the Foundation Kits
Finally, the last step involves fixing the pole onto the foundation kits. Ensure that the solar LED Street light is fixed accurately because if you don’t, then you would need to start all over.
The process will take you about 5 to 7 minutes to complete if you have a crane and two men helping. However, if you are doing it alone, then you can expect for it to take anywhere between 15 and 20 minutes. Hence, it can be said that the entire process of installing a solar LED street light shouldn’t take longer than two hours to complete.